PENGARUHORIENTASI DANFRAKSI VOLUME SERAT DAUN NANAS (ANANAS COMOSUS)TERHADAP KEKUATAN TARIK KOMPOSIT POLYESTERTAK JENUH(UP)

Paryanto Dwi Setyawan, Nasmi Herlina Sari, Dewa Gede Pertama Putra

Abstract


Composite manufacturing is done by hand lay-up method with a fiber volume fraction 10%, 20%, 30%, and 40% with unidirectional and random short fiber orientation of pineapple leaves. Specimen testing is performed with a standard tensile strength test ASTM D3039. As a results is known that the tensile strength of composites increased with increasing fiber volume fraction for unidirectional fiber orientation, but rather to the random orientation of short fibers. Meanwhile, the composite tensile strain increases withincreasingfibervolume fractionfor both theorientation of thefibersof pineappleleaves.


Full Text:

PDF

References


Anonim, 2000, Nanas (Ananas Comosus) http://www.ristek.go.id Bismarck, A., Askargorta, I.A., Lamphe, T., Wielaye, B., Stamboulis, A., Skenderovich, I., Limbach, H.H., 2002, Surface Characterization of Flax, Hemp and Cellulose Fibres: Surface Properties and the Water Uptake Behavior, Journal Polymer CompositeVol 23, no. 5. Eichorn, S.J., Zafeiropoulus, C.A.B.N., Ansel L.Y.M.M.P., Entwistle, K.M., Escamillia, P.J.H.F.G.C., Groom, L., Hill, M.H.C., Rials, T.G., dan Wild, P.M., 2001. Review Current International Research into Cellulosic Fibres and Composites, Journal of Polymer, Volume 37, No 24, Gret Brittain. Feldman. D., dan Hatomo, J.A., 1995, Bahan Polimer Konstruksi Bangunan, Gramedia Pustaka Utama. Gibson, F.R., 1994, Principle of Composite Material Mechanis, International Edition, McGraw-Hill Inc, New York. Hartomo,A.J., Rusdiarsono, A., Hardianto, D., 1992, Memahami Polimer dan Perekat, Andi Offset. Yogyakarta. Sari, N.H., 2009. Polymer and Composite, Diktat Kuliah, Jurusan Teknik Mesin Fakultas Teknik Universitas Mataram, Mataram. Schwartz, M.M., 1984, Composite Materials Handbook, McGraw-Hill Book Co., New York. Sulistijono, 2008, Analisa Pengaruh Fraksi Volume Serat Kelapa Pada Komposit Matriks Polyester Terhadap Kekuatan Tarik, Impact Dan Bending,Jurnal Teknik Mesin,ITS, Surabaya. Supardi, Edi, 1999,Pengujian Logam, Angkasa

Bandung, Bandung. Surdia,T., 2000, Pengetahuan Bahan Teknik, Jakarta: Pradnya Paramita. Wicaksono, Arif, 2006, Karakterisasi Kekuatan Bending Komposit Berpenguat Kombinasi Serat Kenaf Acak dan Anyam, Tugas Akhir, Jurusan Teknik Mesin Fakultas Teknik Universitas Negeri Malang, Malang.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Dinamika Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 
After being re-accredited, the Journal of Dinamika Teknik Mesin, still has sinta 3 (S3) which is valid until 2025.
View My Stats