ANALISIS PERILAKU ALIRAN TERHADAP KINERJA RODA AIR ARUS BAWAH UNTUK PEMBANGKIT LISTRIK SKALA PIKOHIDRO

Kristianus Jamlay, Luther Sule, Duma Hasan

Abstract


Energy of water is one of the renewable energy that can be converted into electrical energy without pollution. Rotation, torque, and power generated by the water wheel can be used directly both for irrigation pumping and for running a rice mill even move the alternator and electrical generators. The purpose of this study was to find the best water wheel performance indicated by torque, rotation, and power as well as the relative speed of the water at the side of the blade. The results obtained in the preliminary test were the average water velocity of 2.50 m/s, the average rotation shaft of 79.78 rpm, the average torque on the shaft of 58.98 Nm, the average power of 510,67 W. The second results were also obtained as given the results and discussion section. It was found that the best water wheel performance based on the analysis was shown in the second test results.


Full Text:

PDF

References


Dietzel F., Sriyono D., 1996, Turbin Pompa dan Kompresor, Erlangga, Jakarta.

Prayatmo, 2007, Turbin Air, Graha Ilmu, Yogyakarta

Siahaan D.H., 2009, Pengujian sudu rata prototipe turbin air terapung pada aliran sungai, Skripsi Teknik Mesin, Universitas Sumatera Utara.

Sihombing E.S., 2009, Pengujian sudu lengkung prototipe turbin air terapung pada aliran sungai, Skripsi Teknik Mesin. Universitas Sumatera Utara.

Sularso, Suga K., 2008, Dasar-dasar Perencanaan dan Pemilihan Elemen Mesin, PT Pradnya Paramita, Jakarta.

Sule L., 2011, Perilaku aliran roda air arus bawah plat bengkok dengan variasi jumlah sudu, Jurnal Teknik Mesin, Universitas Hasanuddin.

Sule L., Wardana I.N.G., Soenoko R., Wahyudi S., 2014, Angled and curved blades of deep-water wheel efficiency, Australian Journal of Basic and Applied Sciences, AENSI Journals.

Yusri, Aidil Z., Asmed., 2004, Analisis daya dan putaran kincir air tradisional sebagai alternatif sumber daya penggerak, Jurnal Teknik Mesin Vol 1, No.2.




DOI: https://doi.org/10.29303/dtm.v6i1.25

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Dinamika Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 
After being re-accredited, the Journal of Dinamika Teknik Mesin, still has sinta 3 (S3) which is valid until 2025.
View My Stats