Perancangan bilah tipe taperless pada kincir angin: Studi kasus di PT. Lentera Bumi Nusantara Tasikmalaya

N.H. Sari, W.G. Laksamana

Abstract


The studies related to new renewable energy are still being developed. This study aims to design taperless blades on wind turbines, case studies at PT. Lentera Bumi Nusantara. The wind speed conditions in Tasikmalaya which are considered relatively moderate can be designed efficiently by the appropriate wind characteristics in Tasikmalaya. Microsoft Excel, Qblade, Solid Works, and aerodynamic equations have been used to design a blade. The result shows that the blades have a solid, easy to make and affordable structure that can produce mechanical power at low wind speeds with a radius, diameter hub and chord length of 0.8 m, 0.19 m and 0.12 m, respectively. A twisting angle at the base and at the end of the blade are 11.14° and 7.17°. respectively. The conclusion of this design exhibited that the blade design with the same edge blade can be applied to moderate wind speeds to produce efficient, compact and affordable wind turbines with wind characteristics in Tasikmalaya, Indonesia.

Keywords


Chord; Twist Angle; Blades; Taperless; Wind Turbine

Full Text:

PDF

References


Burton T., 2001, Wind energy handbook, John Wiley & Sons, Ltd, England.

Fried L., 2015, Global wind statistic 2014, Belgium, Brussels.

Gibran F., Safhire., 2015, Simulation of inverse taper wind turbine blade and transmission for indonesia wind condition, Indonesian Scholars International Convention, London.

Hatta M., Martin A., 2017, Perancangan bilah tipe inverse taper pada turbin angin berdasarkan kondisi angin di pekanbaru, jurnal Jom FTEKNIK, 4(1), 1-4.

Hasting R.C., 1984, Studies of the flow field near a NACA 4412 aerofoil at nearly maximum lift, Royal Aircraft Establishment, Farnborough, England.

Ismail, Arrahman T., 2017, Perancangan turbin angin sumbu horizontal tiga sudu dengan kapasitas 3 MW, Jurnal /PRESISI, 18(2), 10-19.

Madi, 2017, Studi perancangan horizontal axis wind turbine dengan perbedaan desain air foil pada bilah jenis taper untuk pembangkit listrik tenaga angin laut di Pantai Ciheras, PT. Lentera Angin Nusantara Surabaya, Tugas Akhir, Institut Teknologi Sepuluh Nopember Surabaya.

Nishizawa Y., 2011, An experimental study of the shape of rotor for horizontal-axis wind turbine, Japan, InTech.

Piggot H., 2000, Windpower workshop building your own wind turbine, British Wind Energy Association, Peninsula.

Sari N.H., 2018, Material teknik, Edisi pertama, Deepublish, Yogyakarta.

Wood D., 2011, Small wind turbines, Springer, Canada.

Zahra I.N., 2014, Pengenalan teknologi pemanfaatan energi angin Tasikmalaya, PT. Lentera Bumi Nusantara, Tasikmalaya.

Zahra I.N., Situmorang., 2015, Renewable energi nusantara Tasikmalaya, PT. Lentera Bumi Nusantara, Tasikmalaya.




DOI: https://doi.org/10.29303/dtm.v9i2.286

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Dinamika Teknik Mesin: Jurnal Keilmuan dan Terapan Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 
After being re-accredited, the Journal of Dinamika Teknik Mesin, still has sinta 3 (S3) which is valid until 2025.
View My Stats