Pengukuran waktu standar pembuatan produk sampan komposit sandwich untuk menentukan biaya poduksi

I.M. Suartika, A.D. Catur, M. Mirmanto

Abstract


In the efforts to develop the boat of composite sandwich
to overcome the scarcity of wood as a boat material, the
determination of production costs becomes very
important to be studied. The purpose of this study is to
conduct a study related to the amount and time required
in the completion of product units with the stop watch
time study method. The results of the time study were
used to determine the cost or wages of labor in the
production of the boat composite sandwiches. So that all
components of these costs will later determine the
feasibility of production of the boat composite sandwich
products. Based on the results of the measurement of
work time study known standard time production of the
boat composite sandwich with two people labor and shift
work 8 hours / day is 34 hours (equivalent to 5 days) and
production capability 5 units / month. The results of
research related to production process costs are known
fixed costs (FC )= Rp. 1,288,655 and variable costs /
units (c) = Rp. 2,664,333. By conducting break-even
point analysis obtained minimum production units per
month that can be produced by setting the selling price
( ) of the product based on profit margin 5%, 10%,
15%, 20%, 25%, i.e consecutively; 10 units/month, 5
units/month, 4 units/month, 3 units/month, 2 units/month.


Keywords


The boat of composite sandwich; Time study; Standart time; The cost of production

Full Text:

PDF

References


Akhayari H., 2018, Kenali 10 fakta menarik tentang laut Indonesia, https://www. goodnews fromindonesia. id, diakses 11-10-2019.

Masrun, 2015, Pembuatan perahu dari komposit sandwich dengan kulit dari komposit polyester-fiberglass, anyaman strip bambu dan dengan core (inti) berupa polyurethane rigid foam, Fakultas Teknik, Universitas Mataram, Mataram.

Azwar A., Ismy A.S., Saifuddin, 2016, Penguatan kayu dan plywood melalui proses sandwich dengan komposit polyester serat gelas untuk bahan pembuatan perahu, Jurnal Polimesin, 14(1), 14-20.

Catur A.D, Suartika I.M., 2019, Pembuatan sampan komposit sandwich, Cetakan pertama, Penerbit Mataram University Press, Mataram.

Catur A.D., Salman, 2020, Pembuatan perahu nelayan berbahan komposit sandwich dengan teknik hand lay up, Jurnal Kelautan Nasional, 15(2), 65-76.

Khadijah I., Kusumawardhani A., 2016, Analisis pengukuran kerja untuk mengoptimalkan produktivitas menggunakan metode time and motion study, Diponegoro Journal Of Management, 5(3), 1-15.

Cahye M.B, 2020, Pengukuran waktu pembuatan perahu komposit sandwich menggunakan metode pengukuran langsung untuk menentukan biaya produksi, Jurusan Teknik Mesin, Fakultas Teknik, Universitas Mataram, Mataram.

Herlina U., Nurjaman F., Handoko A.S., Shofi A., 2020, Analisis tekno ekonomi teknologi pengolahan bijih nikel laterit menjadi Nickel Pig Iron (NPI) menggunakan Hot Blast Cupola Furnace, jurnal Dinamika Teknik Mesin, 10(1), 2502-1729.

Anggreani S., Adnyana I.G.S., 2020, Penentuan harga pokok produksi dengan metode full costing sebagai dasar penetapan harga jual pada ukm tahu an anugrah, Jurnal Ilmiah Akuntansi Kesatuan, 8(1), 9-16.

Noviasari E., Alamsyah R., 2020, Peranan perhitungan harga pokok produksi pendekatan full costing dalam menentukan harga jual dengan metode cost plus pricing, Jurnal Ilmiah Akuntansi Kesatuan, 8(1), 17-26.

Rahmah N., Kaskoyo H., Saputro S.G., Hidayat W., 2020, Analisis biaya produksi furnitur: studi kasus di mebel barokah 3, Desa Marga Agung, Lampung Selatan, Jurnal Sylva Lestari, 8(2), 207-217.

Suartika I.M., Wijana M., Sudrajadinata M., 2015, Kajian tekno ekonomi unit alat pencacah plastik untuk meningkatkan nilai jual sampah plastik: studi kasus-ud. Sari Plastik Lombok Timur, NTB, Jurnal Dinamika Teknik Mesin, 5(2), 94-104.




DOI: https://doi.org/10.29303/dtm.v11i1.416

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 I Made Suartika, Agus Dwi Catur, - - Mirmanto

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.