Analisa Pengaruh Variasi Sudut Sambungan Belokan Terhadap Head Losses Aliran Pipa

Zainudin Zainudin, I Made Adi Sayoga, Made Nuarsa

Abstract


On the water distribution, the connection of pipe bends is typically obtained either in industry or in housing. On the water distribution, it is often gained the lost of energy or head losses. The amount of head losses occurring in the connection of branch pipe is influenced by several factors, such as: diameter, flow, viscosity, and the angle at the bend pipe connections.

This study aimed to determine the effect of variation of the connection point of the bend pipe to the head losses and pressure drop. To do it, the researcher uses an experimental method as a tool by varying the bend angle is 30o, 45o, 60o, and 90o.

 The result shows that head losses and the small pressure drop occur in the bend angle 30o is 73, 23 mm and 907.606 N/m2. While the head losses and pressure drop is the greatest at an angle of 90o, is 74, 80 mm and 1278,899 N/m2.


Full Text:

PDF

References


Efriandi, Rohman. 2004. Pengaruh Jumlah Saluran Distribusi Terhadap Total Kerugian Head Pada Instalasi Pompa Sentrifugal. Unram, Mataram

Haruo Tahara, Sularso, 2000. Pompa dan Kompresor. Penerbit PT. Pradnya Pramita, Jakarta.

Jack B. event. 1987. Fundamentals of Fluids

Mechanics. McGraw Hill. New York

M. White, Frank dan Hariandja, Manahan. 1988. Mekanika Fluida (terjemahan). Erlangga, Jakarta.

Mody, L. F., Friction Factors for Pipe Flow. Transaction of the ASME, vol. 66, 1944

Muttaqin, Muhammad. 2004. Analisa Kinerja Instalasi Pompa Sentrifugal Untuk Memenuhi Kebutuhan Air di Pdam Praya Lombok Tengah. Unram, mataram.

Raswari. 1986. Teknologi dan Perencanaan Sistem Perpipaan. Penerbit Universitas Indonesia, Jakarta.

Streeter, Victor L. dan Prijono, Arko 1988. Mekanika Fluida (terjemahan). Erlangga, Jakarta.

Suhariono, Edi. 2008. Analisa Head Losses dan Koefisien Gesek Pada Pipa. Kalimantan Scientiae.

www.engineering.toolbox.com


Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Dinamika Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.