Kajian Pengaruh Fraksi Volume Serat Akibat Perlakuan Alkali Terhadap Ketangguhan Impak Komposit Limbah Serat Aren-Polyester

Wijoyo Wijoyo, Achmad Nurhidayat, Catur Purnomo

Abstract


The purpose of this study is to investigate the influence of fiber volume fraction of the impact strength of palm fiber-unsaturated polyester composite and investigate the mechanism of fracture caused by impact loads. This research material is palm fiber (Arenga pinnata), unsaturated polyester matrix yukalac BQTN-EX 157 type, hardener metyl etyl ketone peroxide (MEKPO), alkali solution (NaOH) and H2O. Testing with Charpy impact tester, impact test specimens prepared according to standard test ASTM D-5942. While the macro picture is used for the analysis of the fracture. The results showed that the most optimum impact toughness of palm fiber-polyester composite reached 0.011 J/mm2 on volume fraction (Vf) 40%. While the interaction characteristics of palm-fiber bond strength polyester showed matrix cracking behavior of failure on volume fraction (Vf) 10% to 30%, and fiber pull out the volume fraction (Vf) 40% and 50%, the same fracture behavior between the matrix and fibers in volume fraction (Vf) 40% indicates that fiber and matrix has a strong bonding interaction.

Full Text:

PDF

References


Anonim, 1998. “Annual Book ASTM Standart”, USA. Diharjo K., dan Ngafwan, 2004. “Pengaruh kepadatan Core PVC Terhadap Peningkatan Kekuatan bending dan Impak Komposit sandwich Serat Gelas”, Penelitian Dosen Muda, DIKTI, Jakarta. Diharjo K., Dan Nurhidayat A., 2004. ”Teknik Penguatan Komposit Serat Karung Plastik Berlubang”, Penelitian Dosen Muda, DIKTI, Jakarta. Diharjo K., Soekrisno, Triyono dan Abdullah G., 2002-2003. “Rancang bangun Dinding Kereta Api Dengan Komposit Sandwich Serat gelas”, Penelitian Hibah Bersaing X, DIKTI, Jakarta. George J., Janardhan R., Anand J.S., Bhagawan S.S., dan Thomas S., 1996. ”Melt Rheological behavior os short Pineapple Fibre Reinforce Low Density Polythylene Composites”, Journal of Polymer, Volume 37, No. 24, Gret Britain. Gibson, O. F., 1994. “Principle of Composite Materials Mechanics”, McGraw-Hill Inc., New York, USA. Hadi, B.K, 2000, Mekanika Struktur Komposit, Direktorat Jendral Pendidikan Tinggi, Jakarta. Jones, R. M., 1975. “Mechanics of Composite Materials”, Scripta Book Company, Washington D.C., USA. Karnani R., Krishnan M., dan Narayan R., 1987. ”Biofibre Reinforce Polypropylene Composites”, Reprinted from Polymer Engineering and Science, Vol. 37, No. 2. Kaw A.K., 1997. “Mechanics of Composite Materials”, CRC Press, New York. Pramono, C. 2008.”Pengaruh Larutan Alkali dan Etanol Terhadap Kekuatan Tarik Serat Enceng Gondok dan Kompatibilitas Serat

Enceng Gondok pada Matrik Unsaturated Polyester Yukalac tipe 157 BQTN-EX”. Skripsi, Jurusan Teknik Mesin UNDIP, Semarang. Pramono, C. dan Nurhidayat, A. 2010.”Pengaruh Perlakuan Alkali Terhadap Kekuatan Tarik Komposit Serat Aren (Arenga Pinnata) dengan Matrik Unsaturated Polyester pada Berbagai Variasi Fraksi Volume”. PDM, Kopertis VI, Semarang. Ray D., Sarkar B.K., Rana A.K., dan Bose N.R., 2001. “Effect of Alkali Treated Jute Fibres on Composites Properties”, Bulletin of Materials Science, Vol. 24, No. 2. Shackelford, 1992. “Introduction to Materials cience for Engineer”, Third Edition, MacMillan Publishing Company, New York, USA. Taurista, dkk.2006 “Komposit Laminat Bambu Serat Woven Sebagai Bahan Alternatif Pengganti Fiber Glass Pada Kulit KapalJurusan Teknik Material, Institut Teknologi Sepuluh Nopember, Surabaya. Wijoyo, 2009, ” Kajian Komprehensif Kekuatan Tarik Komposit Serat Aren (Arenga Pinnata) Dengan Matrik Resin Formaldehide”, Simposium Surakarta. Wijoyo dan Diharjo, 2009, ” Analisa Kegagalan Impak Komposit Sandwich Serat Gelas Dengan Core Polyuretan”, MechATronic AUB, Volume 4, hal. 42-51, Surakarta. Wijoyo dan Diharjo, 2007, ” Kajian Komprehensif Kinerja Bending Komposit Sandwich Serat Gelas Dengan Core Polyuretan”, PDM, Dikti, Jakarta. Wijoyo dan Sugiyanto, 2010, ”Pengaruh Larutan Alkali dan Etanol Terhadap Kekuatan Tarik Serat Nanas dan Kompatibilitas pada Matrik Unsaturated Polyester”, PDM, Kopertis VI, Semarang.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Dinamika Teknik Mesin

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 
After being re-accredited, the Journal of Dinamika Teknik Mesin, still has sinta 3 (S3) which is valid until 2025.
View My Stats