Email this article 
Optimasi perancangan turbin air axial aliran horisontal menggunakan analysis of variance
Abstract
The number of blades factor and the blade angle factor on the propeller turbine will be affect to the performance, and one of these factors is dominant affected for the turbine performance. To optimize the design of propeller turbines, must be known the factors that most influence its performance. This study aims to investigate the significance test of difference value in shaft power due to the number of blade factor and the blade angle factor, and to determine the most dominant influence of these factors. Hypothesis test method of these factors on this study using analysis-of-variance or ANOVA with SPSS 17.0 software. The results of this study indicate the significant test in shaft power value in the number of blades factor and the blade angle factor, and there is a relationship between both factors influences in shaft power value significantly. This study also shows the blade angle factor has the most dominant effect in shaft power value, beside the number of blade factor.
Keywords
Full Text:
PDFReferences
Adnan S., 2006, Identifikasi faktor signifikan rancangan faktorial fraksional tanpa pengulangan dengan metode bissell, lenth, dan fang, Institut Teknologi Sepuluh November, Surabaya.
Aghamohammadi, Nasrin, Meriam N., Sulaiman N., Aroua M.K., 2011, Combustion characteristics of biomass in southeast asia, Biomass and Bioenergy, 35(9), 3884–90.
Erinofiardi, Gokhale, Pritesh, Date A., Aliakbar A., 2017, A review on micro hydropower in indonesia, in 1st International Conference on Energy and Power, ICEP2016, 110, 316–21.
Farhan A.P., 2016, Optimalisasi desain turbin PLTA pico- hydro untuk meningkatkan efisiensi daya dengan bantuan software CFD dan konsep reverse engineering, Universitas Sebelas Maret, Surakarta.
Kumar, Yogesh., Ringenberg J., Soma S., Devabhaktuni V.K., Woo J., Nikolaidis E., Andersen B., Abdollah A., 2016, Wind energy : trends and enabling technologies, Renewable and Sustainable Energy Reviews 53, 209–24.
Mohammadzadeh, Saeid, Jalilinasrabady S., Fujii H., Agung N., 2018, Classification of geothermal resources in indonesia by applying exergy concept, Renewable and Sustainable Energy Reviews, 93, 499–506.
Montgomery, Douglas C., Wiley J., 2013, Design and analysis of experiments, Eighth Edition Arizona State University, Penerbit McGraw-Hill Education, New York.
Morandeau, Maxime, Walker R.T., Argall R., Rachel F., Nicholls-lee, 2013, Optimisation of marine energy installation operations, International Journal of Marine Energy, 3(4), 14–26.
Nurdin A., Himawanto D.A., 2018, Review aplikasi bahan bakar biogas pada motor bakar SI (Spark Ignition), Jurnal Simetris, 9(2), 797–802.
Nurdin A., Himawanto D.A., 2018, Kajian teoritis uji kerja turbin archimedes screw pada head rendah, Jurnal Simetris, 9(2), 783–96.
Nurdin A., Himawanto D.A., 2019, Studi numerik kekuatan material transmisi roda gigi pico hydro, Jurnal Teknik Mesin Indonesia, 14(1):24–29.
Ramos., Helena M., Simão M., Borga A., 2013, Experiments and cfd analysis for a new reaction microhydro propeller with five blades, Journal of Energy Engineering, 139(2), 109–117.
Sadi, J.A., 2018, Designing experiments : 3 level full factorial design and variation of processing parameters methods for polymer colors, Advances in Science, Technology and Engineering Systems Journal, 3(5), 109-115.
Salomon, Lithrone L., Kosasih W., Angkasa S.O., 2015, Perancangan eksperimen untuk meningkatkan kualitas ketangguhan material dengan pendekatan analisis general factorial design ( studi kasus : produk solid surface ), Jurnal Rekayasa Sistem Industri, 4(1), 20–26.
Samora, Irene, Hasmatuchi V., Münch-Alligné C., Franca M.J., Schleiss A.J., Ramos H.M., 2016, Experimental characterization of a five blade tubular propeller turbine for pipe inline installation, Renewable Energy, 95, 356–66.
Sarwono J., 2006, Analisis data penelitian menggunakan SPSS 13, Penerbit Andi, Yogyakarta.
DOI: https://doi.org/10.29303/dtm.v10i2.329
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Dinamika Teknik Mesin
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
