Analisis kinerja turbin air arus bawah bentuk sudu bengkok    dengan variasi material

G. A. Duma; L. Sule

doi:10.29303/dtm.v12i2.548

Analisis kinerja turbin air arus bawah bentuk sudu bengkok dengan variasi material

G. A. Duma, L. Sule

Abstract

A water turbine is a device used to convert the potential energy of water into mechanical energy. This mechanical energy is then converted into electrical energy by a generator. This test was carried out experimentally using a crooked blade type with six blades and the type of water turbine used was undershoot. Various types of blade materials are plastic, aluminium, and iron. As well as varying the opening of fluid flow, namely the valve opening of 25%, 50%, 75%, and 100%. The results obtained indicate that variations in turbine blade material have an effect on turbine power and turbine efficiency The highest turbine power and efficiency was obtained at 100% valve opening with a load of 0.7 kg on plastic, iron and aluminium material. The highest turbine power is 1.16 watts for the plastic blade, the aluminium blade is 1.22 watts, and for the iron, the blade is 1.1 watts. The highest efficiency obtained for plastic blades is 50.14 % for experiment and theoretical is 5.67%, aluminium blades are 52.77% for experiment and 54.41% for theoretical, iron blades are 47.5% for experiment and 48.97% for theoretical.

Keywords

Energy; Water turbine; Blade material; Efficiency; Power

Full Text:

PDF

References

Budiarso, Helmizar, Warjito, Agus, N., Wahyu, R., and Dendy, A.. Performance of breastshot waterwheel in run of river conditions. AIP Conference Proceedings 2227, 020014 (2020); https://doi.org/10.1063/5.0000940

Debby, E., Ikhwanul, Q., and Gatut, R. Tingkat kekasaran permukaan sudu dan sudut input air terhadap unjuk kerja turbin vortex, JUSTE (Journal of Science and Technology), 1.2 (2021) 182-194.

Setyawan, E.Y., Djiwo, S., Praswanto, D.H., Suwandono, P., Siagian, P., Design of low flow undershot type water turbine, Journal Of Science And Applied Engineering (JSAE), 2(2) (2019), 50-55.

Gerard, A.D., Analisis kinerja kincir air sudu plat dengan variasi sudu material, Universitas Hasanuddin, 2021.

Irawansyah, H., Mesin konversi energy, Mesin Konversi Energi, 91, (2017) 399–404.

Luther, S., Andi, A.M., Onny, S., Performance of undershot water wheel with bowl-shaped blades model, International Journal of Technology, 11(2) (2020), 278-287.

Mahmuddin, M., Sulaiman, S., Honeng, J., Analisis prestasi roda air sudu plat miring dinamis, J-Move: Jurnal Teknik Mesin, 1(1) (2019), 1–10.

Syafriyudin, B., Fajar, Winoto, S.H., Facta, M., Early analysis of jumping water effect on breastshot waterwheel for microhydro power plant, The 2nd International Joint Conference on Science and Technology (IJCST) 2017. IOP Conf. Series: Journal of Physics: Conf. Series, 953 (2018) 012039.

Syafriyudin, Beny, F., Prabudtya, B.W., Jumping water method on microhydro power plant for water channel, Advances in Social Science, Education and Humanities Research, volume 102. 1st International Conference on Technology and Vocational Teachers (ICTVT 2017).

DOI: https://doi.org/10.29303/dtm.v12i2.548