Komparasi sifat mekanik antara komposit epoksi berpenguat abu dan sekam padi

M. Martijanti; S. Sutarno; R. Sukwadi; M.B. Wahyu

doi:10.29303/dtm.v13i2.649

Komparasi sifat mekanik antara komposit epoksi berpenguat abu dan sekam padi

M. Martijanti, S. Sutarno, R. Sukwadi, M.B. Wahyu

Abstract

Indonesia is an agricultural country because most of the population works in the agricultural sector. One of them is from agricultural products, namely rice. The milled rice produces rice and rice husks. Rice is used by the people of Indonesia as a staple food. Meanwhile, rice husks and ashes have not been utilized optimally. Seeing the great potential of rice husk and ash, efforts have been made to optimize the use of rice husk and ash as composite materials. The research aimed to obtain tensile strength, bending strength and porosity analysis of each composite using 230 mesh size rice husk particles or rice husk ash. The different volume fraction variations are 25% rice husk particles or its ashes and 75% epoxy matrix for the first variation, while for the second variation, it is 40% rice husk particles or its ashes and 55% epoxy matrix. The process of making composite materials was carried out using the hand lay-up and vacuum bag method with the test sample size according to the test standards used, namely ASTM D3039 for tensile strength testing and ASTM D790-61 for bending strength testing. The results of the mechanical properties test obtained the greatest tensile strength value in the epoxy composite reinforced with rice husk ash (40% wt) of 12.73 MPa and the greatest bending strength was in the epoxy composite reinforced with rice husk (40% wt) of 63.87 MPa. Preliminary characterization of rice husk and ash-reinforced epoxy composites met SNI standards.

Keywords

Composite; Rice husk: Rice husk ash: Mechanical property

Full Text:

PDF

References

Adryani, R., Maulida, Pengaruh ukuran partikel dan komposisi abu sekam padi hitam terhadap sifat kekuatan tarik komposit poliester tidak jenuh, Jurnal Teknik Kimia USU, 3 (4), 31 – 36, 2014.

Aldhera, I.R., Allosomba, Y.P., Diantono, A.M., Indarto, V.R., Kristiyanto, Y.M., Fanesa, A., Chandra, D., Rantetabong, M., Pakpahan, T.M., Pemanfaatan limbah padi menjadi arang sekam sebagai pendapatan petani di desa Plembutan, Playen, Yogyakarta, Jurnal Atma Inovasia (JAI), 2 (2), 199–203, 2022.

Anwar, F., Mangalla, L.K., Sisworo, R.R., Pengujian sifat fisik dan mekanik pada komposit papan partikel berbahan dasar limbah serbuk kayu, serbuk ban bekas dan resin polyester, ETHALPY: Jurnal Ilmiah Mahasiswa Teknik Mesin, 7 (2), 51 – 56, 2022.

ASTM D3039/D3039M, Annual book of ASTM standards, 1–13. https://doi.org/10.1520/D3039, 2014

ASTM D2734-94, Standard test methods for void content of reinforced plastics. ASTM Standards, 08 (Reapproved 2003), 1–3. https://doi.org/10.1520/D2734-94R03, 1994

ASTM D790-61, https://lhc-div-mms.web.cern.ch/tests/MAG/docum/ Radiation_resistance/Literature/Standards/

ASTM%20 D790-61.pdf, 18 – 61, 1994.

Chandra, A., Miryanti, Y.I.P.A., Widjaja, L.B., Pramudita, A., Isolasi dan karakterisasi silika dari sekam Padi, Jurnal Fisika Dan Aplikasinya, 2016.

Dera, N.S., Ismail, S., Talango, N., Ishak, S., Sifat fisik papan komposit limbah sekam padi berperekat polyester dengan surface metode, , Momentum, Vol. 19 (1) , 27 – 32, 2023.

Ferdiansyah, Premesti, A.S.A., Fathichin, A.R., Ariani, B.M.G., Fahmi, A.H., Mirzayanti, Y.W., Review Studi: Analisa pemanfaatan limbah sekam padi sebagai bahan material maju”, Prosiding Seminar Nasional Teknologi Industri Berkelanjutan III (SENASTITAN III), Surabaya, 2022.

Firmansyah, Tensile test : pengertian, prosedur, acceptance dan standard, https://www.detech.co.id/tensile-test/, 2020

Gautama, C.R., Alfatih, M.F., Alim, S., Eksperimen uji bending pada komposit resin polyester dan epoxy serat jerami padi dengan proses hand lay up, Jurnal Teknik, Elektronik, Engine, 8 (2), 237 – 242, 2022.

Hanif, P., Wicaksono, S.T., Hidayat, I.P., Pengaruh komposisi filler limbah polypropylene dan sekam padi terhadap sifat fisis dan mekanik komposit untuk aplikasi papan semen partikel, Jurnal Teknik ITS, 8 (2), 99 – 105, 2019.

Johari, A.F., Kardiman, D.T. Santosa, Pengaruh temperatur terhadap pembuatan papan sekam padi berbasis limbah HDPE menggunakan metode hot press”, Jurnal Rekayasa Mesin, 16 (1),17 – 24, 2021.

Kementerian Pertanian,Menggembirakan, produksi padi 2020 dan potensi Januari - April 2021 naik dibandingkan tahun lalu.” https://www.pertanian.go.id/home/?show=news&act=view&id=4716 (diakses 12 Januari 2023).

Kardiman, F.D., Fuadi, F.C., Widianto, E., Pengaruh temperatur terhadap sifat mekanik pada pembuatan papan komposit berbasis sekam padi dan matriks HDPE, Jurnal Ilmiah Teknik Mesin, XI (1),10 -18, 2019.

Khasanah, Y.B.I.N., Prasety, O.R., Wirawati, I., Rahmadhani, N., Poerwaningsih, R., Ramdhani, D.M., Harvest and rice production area in Indonesia 2020,Badan Pusat Statistik, 2021.

Martijanti, M., Sutarno, S., Juwono, A.L., Polymer composite fabrication reinforced with bamboo fiber for particle board product raw material application, Polymers, 13 (4377), 1-21, 2021.

Nurhidayat, A., Kajian variasi matrik komposit serbuk sekam padi limbah terhadap sifat mekanik, Jurnal Teknosains Kodepena, 01(01), 29–36, 2020.

Rohim, A.M., Fianti, Nurbaiti, U., Potensi sekam padi dan jerami sebagai alternatif material akustik, Physics Education Research Journal, 2 (1),35-42, 2020.

Rudi, S.H., Pengaruh fraksi volume komposit poliester yang diperkuat serbuk sekam padi (rice husk flour) terhadap sifat mekaniknya, Skripsi, Fakultas Teknik Universitas Brawijaya, Malang, 2006.

Wulandari, Pembuatan dan pengujian papan partikel komposit berbahan baku sekam padi dengan menggunakan proses hot press, Tugas Akhir Program Studi Teknik Mesin, Universitas Singaperbangsa Karawang, 2018.

DOI: https://doi.org/10.29303/dtm.v13i2.649