Simulasi karakteristik mesin termoakustik pembangkit listrik dengan penambahan model kerugian minor dari dua segmen konis
Abstract
Acoustic energy output level from regenerator segment of a thermoacoustic engine model is attenuated along it’s loop due to several conditions including minor losses. This article discusses the result of Delta EC simulation of a thermoacoustic engine model acting as simple electric power generator that inserted with two conical segments. The cone segments are capable to lower the energy loss which in turn improve the overall performance of the engine in term of nett heat to acoustic energy conversion efficiency. Combined acoustic energy loss induced by both cones is equivalent to 4.94 watts minor losses. At this condition, regenerator segment amplifies the incoming acoustic energy flow of 57.02 watt up to 93.57 watt, which is equals to 36.55 watts acoustic amplification. It leads to increasing of overall engines heat to acoustic efficiency into 14.05%, which is 1.29% higher than those at the case of without cones. This engine performance improvement addressed to smoother streamline of working fluid flow inside the loop.
Keywords
Full Text:
PDFReferences
Chen G., Tang, L., Mace, B., Yu, Z., Multi-physics coupling in thermoacoustic devices: A review, Renewable and Sustainable Energy Reviews 146, 2021, https://doi.org/10.1016/j.rser.2021.111170.
Gaikwad, M.K., Shinde S.U., Naidu, M.J., Jadhav, T.A., Kumar, R., Salunkhe, S., Cep, R., Nasr, E.A., Performance evaluation of looped tube thermoacoustic power generator using cyclic analysis, Frontiers in Mechanical Engineering 10, 2024, https://doi.org/10.3389/fmech.2024.1357332.
Hsu, S.H., Lai, C.H., Evaluating the onset conditions of a thermoacoustic Stirling engine loaded with an audio loudspeaker, Frontiers in Thermal Engineering 3, 2023, https://doi.org/10.3389/fther.2023.1241411.
Iniesta, C., Olazagoitia, J.L., Gros, J., Vinolas, J., Aranceta, J., Introduction to thermoacoustic Stirling engines - First steps and praxis, 19th International Stirling Engine Conference, E3S Web of Conferences 313, 08005, 2021, https://doi.org/10.1051/e3sconf/202131308005.
McGaughy, M., Wang, C., Boessneck, E., Salem, T., Wagner, J., A Traveling Wave Thermoacoustic Engine - Design and Test, ASME Letters in Dynamic Systems and Control 1, 031006, 2021
Nurpatria, Syahrul, Pandiatmi, P., Sayoga, I.M.A, Mulyanto, A., Penentuan efisiensi konversi energi mesin termoakustik dengan simulasi parameter regenerator, Prosiding SAINTEK LPPM UNRAM, 2019.
Nurpatria, Susana, I.G.B, Joniarta, I.W., Nurchayati, Tira, H.S., Peningkatan efisiensi mesin termoakustik, Prosiding SAINTEK LPPM UNRAM, 2020.
Nurpatria, Mirmanto, Rachmanto, T., Sayoga, I.M.A., Susana, I.G.B, “Simulasi kopling loudpeaker sebagai alternator linier di mesin termoakustik berbahan bakar biomassa”, Prosiding SAINTEK LPPM UNRAM, 2021.
Nurpatria, Mirmanto, Joniarta, I.W., Padang, Y.A., Susana, I.G.B, “Simulasi pemasangan sebuah model kerugian minor perubahan penampang di konektor loop mesin termoakustik”, Dinamika Teknik Mesin 13(1), 64-68, 2023.
Suharyati, Pambudi, S.H., Wibowo, J.L., Pratiwi, N.I., Outlook Energi Indonesia 2019, BPPT Indonesia, 2019.
Swift, G.W., Thermoacoustics: a unifying perspective for some engines and refrigerators, Fifth Draft, Los Alamos USA, 2001.
Ward, B., Clark, J., Swift, G.W., Design environment for low-amplitude thermoacoustic energy conversion (DELTA-EC) Version 6.2, Los Alamos USA, 2008.
DOI: https://doi.org/10.29303/dtm.v14i2.845
Refbacks
- There are currently no refbacks.
Copyright (c) 2024
![Creative Commons License](http://licensebuttons.net/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
![](/public/site/images/admin/Sertifikat_DTM_20241.png)